HAML-RBH Direct Drive and Jackshaft
Commercial and Industrial Door Operator
Right Angle
Hollow shaft GearMotor
The HAML-RBH is your operator for Vertical Balanced Doors (spring or counterweight) and doors without
balancing as well as Horizontal Door applications. The compact Right Angle hollow shaft GearMotor of this
operator provides high speed, high cycle and energy efficient service. With dimensions of 4.3” x 4.3” x 16”
and weighing only 36 lbs. the operator delivers reliable service for up to 5,000 open and close cycles/day
at door speeds up to 5 times that of other operators.
The Right Angle hollow shaft GearMotors are sealed and require no
maintenance. They are built into an aluminum body which can withstand
corrosive and toxic environments. These powerful drives work equally well
in wet and cold temperature environments.
The standard control panel is a NEMA1 16” x 16” x 6” steel case,
open, close and stop buttons and power indicator light. NEMA
4X/12 panel is available.
Applications
Car wash, Cold storage, Pharmaceutical, Agricultural, Food
facility, Sectional, Grilles, Rolling steel, High speed fabric, Vinyl
rollup, High and Medium speed horizontal doors.
Features and benefits
• Compact and light weight - Fast installation
• Comfortably fits into very limited space – Increases
application opportunities
• Fast open and close door cycles independently set – Smooth
and quiet operation, Savings on heating and cooling
• On site speed adjustment capability
• No maintenance GearMotor – Sealed stainless steel bearings,
no belts, no limit switches or hydraulic cylinders to maintain
• One operator can handle all AC voltage applications (115,
208, 230, 460, 575)
• Soft start/stop - Reduces mechanical stress on door and
components, ultra quiet operation
• Battery backup capability – Provides for operation even if AC
power is lost or a brownout condition occurs
• Electronically set door open and close limits - No mechanical
switches
• PositionTrak
TM
tracks and remembers door position with or
without power – No recalibration once installed
• UL325 compliant (Optional)
• UL/ULC listed
NEMA 1 Control Panel
Carwash application
Power
• Brushless, DC, high reliability, high efficiency and low
maintenance motor
• Each operator can be connected to any of the following AC
voltages; 115, 208, 230, 460, 575VAC single/three phase,
50/60Hz – One operator for all voltages
• Battery backup is provided by three 4AH (36VDC) sealed
batteries
• Intelligent, internal battery charger
• 24 VDC 1.5 Amp for external devices
• 24 VAC 1 Amp for external devices
Gates and Doors Inc.
60 Ferrier St., Markham, Ontario, Canada, L3R 2Z5
www.gatesanddoorsinc.com sales@gatesanddoorsinc.com
Add-on features
Can be ordered any time for field upgrade
• Battery backup
• Axial chain hoist
• Right Angle chain hoist
• Right angle chain hoist with brake (NEMA1 only)
• Solid shaft adaptor 1” x 3” with keyway and side mount
bracket
• Solid shaft adaptor 1.25 ” x 3” with keyway and side mount
bracket
Available with operator order only
• UL-325 with NEMA 4 photo-eye
• Opto-Block
TM
• NEMA 4 16” x 14” x 8” panel
• 1” or 1.25” hollow shaft
GDI reserves the right to modify the contents without prior notification.
Ver. 1.04
Right angle
chain hoist add on
Axial chain hoist add on
Installed Right Angle GearMotor
